Products - Washers

Spring Washers
Spring washers are the most commonly used part to prevent assembly components from loosening. They apply greater bolt tension per unit of applied torque, and provide protection against loosening resulting from vibration. we provide you with a wide range of products in regular as well as in metric shapes and specifications.

Common Standards, Grade & Rang:

Plain Washers
A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Washers are also important for preventing galvanic corrosion, particularly by insulating steel screws from aluminum surfaces.

Common Standards, Grade & Range:

Pack Washers
A washer is a thick plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Pack Washers are also important for preventing galvanic corrosion, particularly by insulating steel screws from aluminum surfaces.

Common Standards, Grade & Range:

Taper Washers
Taper Washer is square or half round, Taper washers are designed to be used on channel sections, underneath nuts with tapered flanges to enable the bolt assembly to fit square when tightened. ASP is one of the leading Industrial Tapers Washers manufacturers, suppliers & exporters. At ASP, we provide you with a wide range of products in regular as well as in metric shapes and specifications.

Common Standards, Grade & Range:

HSFG Washers
These are hardened and tempered washers to be used in the assembly of HSFG Bolts & Nuts for proper gripping of pliers in the structures.

Common Standards, Grade & Range:

DTI Washers
Direct Tension Washers (DTI) are manufactured with a special configuration to be used with HSFG Bolts & Nuts to comply mechanical properties of 8.8 and 10.9 grades. It has an important role in the Tightening Process. During tightening the protrusions of the DTI Washers get compressed thereby ensuring proper tightening achieving required tension by applying torque.

Common Standards, Grade & Range: